1. BUTTON CONTROL PANEL - Allows the operator to command all transfer functions. It is connected to the control unit by an easy to use extensible cable.
  2. SIDE RAIL - Ensures patient’s safety during transport. The rails must not be used to move, position or guide the MOBILIZER 3.
  3. HANDLES - Two on each side of the bed, they are used to move, position and guide the MOBILIZER 3.
  4. PUSH BAR - On the two short sides of the bed, they are used with the handles (3) to move, position and guide the MOBILIZER 3.
  5. WHEELS - Allow the MOBILIZER 3 to be moved. When locked, they keep theMOBILIZER 3 still during transfer operations. The operator can choose between the STEER (green button ) or LOCK (red button) on each pedal. By pressing STEER, the wheel in question will remain locked in its angular position to facilitate steering. By pressing LOCK, none of the wheels can rotate. If the MOBILIZER 3 does not have active brakes, the transfer actions are disabled.
  6. HOOKS FOR BAGS OR DRAINAGE - Two per side.
  7. TRANSFER SURFACES - Two tables and two sheets that are extracted when transferring the patient from one bed to another.
  8. IV POLE HOLE - IV processes can be continued while transporting the patient. On each of the 4 corners.
  9. FUSE HOLDER - The fuse (6.3 x 32 F20A) must be assembled when first put to use. The MOBILIZER 3 is delivered with the fuse removed to conserve the battery.
  10. OPERATOR SIDE - On the operator side there are the remote controls for transfer operations (button panel) and the control unit.
  11. PATIENT SIDE - The patient side is the side on which the transfer table is extracted and retracted.
  12. CONTROL UNIT - Contains the ON-OFF switch and the LCD display indicating the information relative to the state of the MOBILIZER 3.
  13. SAFETY SWITCH (below the covers) - Alarms placed below the upper covers of the base that prevent lowering of the bed if an object has been placed above the base.
  14. CONNECTION FOR BATTERY CHARGING
Technical features:
Height: min. 67 cm (27"), max 104 cm (42")
Width: 76 cm (30")
Length: 206 cm (82")
Weight of equipment: 209 Kg (460 lbs.)
Maximum weight of patient: 200 Kg (441 lbs.)
Length of transfer surface: 185 cm (73")
Batteries: 24 Vdc 26 Ah
Duration of batteries: 2 hours (continous use)
Battery charger technical features: Mascot Model 9940 or 9941
Voltage input: 100-240V
Frequency: 50-60 Hz
Maximum absorption: 0,9 A
Voltage output: from 27,6V to 29,5V
Maximum current: 1,3A